| Aitema | Malosiaga |
| fa'avasegaga laupapa | Fa'avae Alumini, Kopa Fa'avae, Fa'avae u'amea, fa'amea'amea fa'aofuina 'apamemea, Fa'atasi Bade Board |
| meafaitino | Aiga Alumini, 'apamemea fale, alumini fa'aulufale mai, apamemea faaulufaleina |
| togafitiga luga | HASL/ENIG/OSP/silver |
| account layer | laupapa lolomi e tasi itu / laupapa lolomi itu lua |
| maxi.board Tele | 1200mm*480mm |
| min.board Tele | 5mm*5mm |
| fa'ailoga lautele/apsce | 0.1mm/0.1mm |
| tui ma mimilo | <=0.5%(mafiafia:1.6mm, laupapa Tele:300mm*300mm) |
| mafiafia laupapa | 0.5mm-5.0mm |
| apamemea vale mafiafia | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| V-CUT tikeri faapalepale | CNC ta'avale:±0.1mm;tu'i:±0.1mm |
| Resitala V-CUT | ±0.1mm |
| Pu puipui apamemea mafiafia | 20um-35um |
| Min resitalaina o tulaga pu (tolauapiga ma fa'amaumauga CAD) | ±3mil(±0.076mm) |
| Min.tu'i pu | 1.0mm i lalo, 1.0mm(Mafiafia laupapa lalo1.0mm,1.0mm) |
| Min.tu'i sikuea sikuea | 1.0mm i lalo，1.0mm*1.0mm (O le mafiafia o laupapa i lalo ole 1.0mm,1.0mm*1.0mm) |
| Le resitalaina o matagaluega lolomi | ±0.076mm |
| Min.drill pu diameter | 0.6mm |
mafiafia o togafitiga luga | ufiina auro:Ni 4um-6um,Au0.1um-0.5um ENIG:Ni 5um-6um,Au:0.0254um-0.127um siliva: Ag3um-8um HASL: 40um-100um |
| V-CUTdegree faapalepale | ±5(Tikeri) |
| V-CUT laupapa mafiafia | 0.6mm-4.0mm |
| Min.Lefend lautele | 0.15mm |
| Min.Solder mask tatala | 0.35mm |